T-31 Anchor Machine Replacement Rubber Gasket
This foam rubber gasket is a direct replacement for the original gasket that comes on each T-31 anchor machine. Precut to required length for installation.
If your anchor machine is in need of further repair or reconditioning, please send machines directly to us. We estimate costs prior to service and then complete repairs quickly. Shipping address is:
Coldspring, ATTN: Tooling, 17482 Granite West Rd., Cold Spring, MN 56320
$9.10
Additional Anchor Machines
-
1/4″ Dia. By 4″ Length
PART# 991-400-0025 $198.70 -
1/16″ x 1″ 2-Way Strap Anchor
PART# 991-400-0202 $4.90 -
3/8″ T-31 Anchor Bits with a 3/8″ Shaft
PART# 902-225-0011 $41.50 -
Sink Clip Anchor – 1 3/8″ Long x 1″ Wide x 1/8″ Thick
PART# 991-400-0139 $2.00 -
1/4″ Dia. By 1 1/2″ Length
PART# 991-400-0021 $107.20 -
3/16″ Dia. By 1 1/2″ Length
PART# 991-400-0004 $82.60 -
3/8″ Dia. By 2″ Length
PART# 991-400-0040 $172.60 -
3/16″ T-31 Anchor Bits with a 3/8″ Shaft, Center Water
PART# 902-225-0014-CNC $33.60 -
3/16″ Non-Standard 1/4″ Shank T-31 Bits
PART# 902-225-0016 $33.60 -
3/16″ Dia. By 2″ Length
PART# 991-400-0001 $86.70 -
1/4″ Collet Sleeve for T-31 Anchor Machine
PART# 028-500-0930 $46.50 -
1/4″ Dia. By 2″ Length
PART# 991-400-0023 $110.00 -
1/16″ x 1″ 1-Way Strap Anchor
PART# 991-400-0201 $3.90 -
1/4″ T-31 Anchor Bits with a 3/8″ Shaft
PART# 902-225-0010 $33.80 -
3/8″ Non-Standard 1/4″ Shank T-31 Bits
PART# 902-225-0019 $68.30 -
3/8″ Dia. By 3″ Length
PART# 991-400-0042 $210.00 -
3/8″ Collet Sleeve for Electric T-31 Anchor Machine
PART# 928-500-0984 $44.70 -
1/4″ Dia. By 2 1/2″ Length
PART# 991-400-0027 $137.20 -
1/16″ x 1″ 2-Way Strap Anchor with Slots
PART# 991-400-0217 $9.10 -
1/4″ Dia. By 1 1/4″ Length
PART# 991-400-0020 $86.70 -
1/4″ T-31 Anchor Bits with a 3/8″ Shaft, Center Water
PART# 902-225-0010-CNC $37.50 -
1/4″ Dia. By 1 3/4″ Length
PART# 991-400-0022 $125.80 -
1/8″x 1″ 2-Way Strap Anchor
PART# 991-400-0107 $9.50 -
3/16″ T-31 Anchor Bits with a 3/8″ Shaft
PART# 902-225-0014 $27.90 -
1/4″ Dia. By 3″ Length
PART# 991-400-0024 $151.50 -
3/8″ Dia. By 2 1/2″ Length
PART# 991-400-0041 $185.00 -
3/16″ Dia. By 2 1/2″ Length
PART# 991-400-0002 $95.00 -
3/8″ Dia. By 4″ Length
PART# 991-400-0043 $232.90 -
Electric #31 Anchor Machine without Vacuum Pad
PART# 991-001-0011 $1,510.00
Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.