1″ Full Bullnose with Center Washer – 30/40 Diamonds
Cutting a form V, 1″ thickness, this profile wheel has a standard connection of a 5/8″-11 female thread with a center water feed. An adapter is available to convert the wheels to a 1/2″ diameter shaft drive. Diameter of bearing guide is 2 3/4″. Wheels come with a detachable bearing guide. Wheels are standard with coarse (30/40) diamonds. Finer (50/60) diamonds, custom sizes, connections and profiles may be ordered upon request. All wheels in good condition may be replated to provide new tool performance at a discounted price.
$347.10
Additional Full Bullnose
-
3/16″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0930 $200.70 -
3 cm Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1935 $322.70 -
2 cm Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1950 $289.50 -
2″ Dia. x 1 1/2″ Wide Drum
PART# 902-299-1004 $214.30 -
1 1/2″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1206 $110.30 -
3/4″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0938 $290.00 -
4 cm Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1952 $322.70 -
4 cm Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1936 $330.80 -
45° Bevel x 1/2″ Wide with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1972 $256.50 -
5/8″-11 Female Thread to Ghines Male
PART# 991-200-0064 $59.70 -
5/8-11 Female to 5/8-11 Male with 1/2″ Hose Connection
PART# 991-200-0154 $215.40 -
1 1/2″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1205 $93.10 -
3/16″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1930 $194.10 -
5/8″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0217 $94.50 -
45° Bevel x 1/2″ Wide with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0972 $275.70 -
3″ OD x 1 1/2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0918 $291.50 -
1″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1939 $314.30 -
3/4″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1938 $248.30 -
3″ OD x 2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1920 $359.70 -
5/8″-18 Male Thread to 5/8-11 Male Thread
PART# 991-200-0113 $89.40 -
2 cm Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0934 $275.70 -
5″ OD Face Grinding Wheel – 30/40 Diamonds
PART# 902-221-0751 $251.40 -
3″ OD x 2″ Wide Lightweight Drum with Center Water Feed – 50/60 Diamonds
PART# 902-221-1313 $316.60 -
3″ OD x 1″ thick 45° Bevel Wheel – 50/60 Diamonds
PART# 902-221-1702 $165.40 -
3″ OD x 1″ thick 45° Bevel Wheel – 30/40 Diamonds
PART# 902-221-0702 $181.30 -
2″ OD x 2″ Drum with Bottom Brg – 50/60 Diamonds
PART# 902-221-1921 $272.90 -
5/8″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1933 $243.20 -
1 1/2″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0205 $107.10 -
4 cm Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0936 $442.90 -
2″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0948 $554.60 -
5/8″ OD x 1 5/8″ Cutter Bit ONLY for 221-0923 – 50/60 Diamonds
PART# 902-221-1924 $115.90 -
3″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1305 $173.30 -
2″ OD x 1 1/2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1914 $190.40 -
1/4″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0931 $210.60 -
4″ Dia. Coarse Segmented Disk
PART# 902-240-0172 $245.90 -
2″ OD x 2″ Drum with Bottom Brg – 30/40 Diamonds
PART# 902-221-0921 $258.50 -
3 cm Full Bullnose with Center Bearing & Water – 50/60 Diamonds
PART# 902-221-1946 $459.80 -
5/8-11 Female to 5/8-11 Male with 1/4″ Hose Connection
PART# 991-200-0153 $212.30 -
6″ OD Face Grinding Wheel – 30/40 Diamonds
PART# 902-221-0752 $306.10 -
3 cm Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0935 $363.90 -
3 cm Full Bullnose with Center Bearing & Water – 30/40 Diamonds
PART# 902-221-0946 $496.20 -
5/’8″ OD x 1 5/8″ 2 Piece Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0923 $189.00 -
5/8-11 Female Thread to Hole for 1/4″ Shaft
PART# 991-200-0060 $60.00 -
3/4″ R Convex with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0961 $280.50 -
4″ OD Face Grinding Wheel – 50/60 Diamonds
PART# 902-221-1750 $173.70 -
2″ Full Bullnose with Center Bearing & Water – 50/60 Diamonds
PART# 902-221-1945 $665.50 -
5/’8″ OD x 1 5/8″ 2 Piece Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1923 $197.00 -
5/8″-18 Male Thread to 1/2 Gas Female Thread
PART# 991-200-0066 $66.70 -
3/8″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1932 $206.90 -
2″ OD x 1 1/2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0914 $197.00 -
3 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0941 $296.30 -
5/8″-11 Female Thread to Hole for 3/4″ Shaft
PART# 991-200-0063 $88.10 -
5/8″-11 Female Thread to Hole for 3/8″ Shaft
PART# 991-200-0061 $65.60 -
2 1/2″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1214 $122.90 -
3/8″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0932 $212.80 -
3/4″ R x 2 1/2″ OD x .78″ Thick Convex Wheel – 50/60 Diamonds
PART# 902-221-1703 $154.40 -
3″ OD x 2″ Drum with Bottom Brg – 50/60 Diamonds
PART# 902-221-1922 $359.70 -
2 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0950 $302.60 -
1 1/2″ Full Bullnose with Center Washer & Water – 30/40 Diamonds
PART# 902-221-0944 $417.50 -
5/8″ R Convex with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0960 $228.40 -
3 cm Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1951 $306.10 -
2″ OD x 2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1916 $217.30 -
2 1/2″ OD x 2 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0216 $198.50 -
3″ OD x 2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0305 $236.40 -
5/8″ OD x 1 5/8″ Cutter Bit ONLY for 221-0923 – 30/40 Diamonds
PART# 902-221-0924 $122.90 -
1/4″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1931 $199.20 -
45° Bevel x 1/4″ Wide with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0970 $208.40 -
3 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0951 $326.10 -
5/8″-11 Female Thread to Hole for 1/2″ Shaft
PART# 991-200-0062 $86.50 -
2 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0940 $277.80 -
3 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1941 $294.60 -
5/16″ Solid Core Drill
PART# 902-227-3003 $74.30 -
2 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1940 $270.30 -
1/2″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1937 $239.90 -
2 1/2″ OD x 2 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1216 $140.20 -
3/4″ R x 2 1/2″ OD x .78″ Thick Convex Wheel – 30/40 Diamonds
PART# 902-221-0703 $173.30 -
5/8″-11 Female Thread to 16mm Male Thread
PART# 91-200-0042 $22.40 -
2″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1212 $129.20 -
5/8″-18 Male Thread to to Ghines Thread
PART# 991-200-0068 $72.10 -
3″ OD x 2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0920 $358.90 -
5/8″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0933 $266.20 -
3″ OD x 1 1/2″ Wide Lightweight Drum with Center Water Feed – 50/60 Diamonds
PART# 902-221-1312 $220.50 -
5/8″ R Convex with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1960 $223.50 -
1″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0939 $345.10 -
1″ Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1943 $366.60 -
4″ OD Face Grinding Wheel – 30/40 Diamonds
PART# 902-221-0750 $215.10 -
4 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1942 $372.20 -
3″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0304 $212.80 -
4 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0942 $417.50 -
5/8″-11 Female Thread to 1-1/4″ x 7 (M)
PART# 91-200-0391 $155.70 -
3″ OD x 1 1/2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1918 $256.50 -
5/8″-11 Female Thread to 1/2 Gas Female Thread
PART# 991-200-0065 $71.40 -
3″ Dia. x 1 1/2″ Wide Drum
PART# 902-299-1003 $278.60 -
6″ OD Face Grinding Wheel – 50/60 Diamonds
PART# 902-221-1752 $231.60 -
3″ OD x 2″ Drum with Bottom Brg – 30/40 Diamonds
PART# 902-221-0922 $358.90 -
3″ OD x 2″ Wide Lightweight Drum with Center Water Feed – 30/40 Diamonds
PART# 902-221-0313 $370.20 -
3/4″ R Convex with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1961 $256.50 -
4 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0952 $338.70 -
5/8″ R x 2 1/2″ OD x .80″ Thick Convex Wheel – 30/40 Diamonds
PART# 902-221-0701 $165.40
- Shop by Connection Type
- 1 1/4"-7 (F) Connection
- 1-1/2" Vektor/Infinity
- 1"
- 1" Bore
- 1/2 Gas
- 1/2" Shaft
- 1/4" Shaft
- 1/8" Shaft
- 16 mm
- 25 mm Bore
- 3/8" Shaft
- 35 mm Bore
- 5/8" Bore
- 5/8"-11
- 5/8"-18
- 50 mm Bore
- 6 mm Shaft
- 60 mm Bore
- 7/8" Bore
- Anchoring Systems
- Anchors
- Blade Bushing
- Sector & Ghines
- Velcro
- Shop by Machine
- Shop by Tool Type
- 1/2 Gas Bits and Drums
- Adapters & Bushings
- Anchoring Systems
- Diamond Blades
- Drills
- Router Tools
- Shaft Die Grinder Tools
- Vektor/Infinity Tooling
- Water Jackets
- Wheels
- Uncategorized
Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.