3″ Dia. x 2″ Wide Lightweight Drum with Center Water Feed
PART# 902-299-1006
Coarse diamond segmented wheels come standard with a 5/8″-11 threaded connection. These wheels allow for fast material removal from any stone while maintaining a long life span. May be retipped for new tool performance at a reduced price.
$457.10
Additional Coarse Diamond Segmented Wheels
-
6″ OD Face Grinding Wheel – 30/40 Diamonds
PART# 902-221-0752 $306.10 -
2″ Dia. x 1 1/2″ Wide Drum
PART# 902-299-1004 $214.30 -
2″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0948 $554.60 -
3″ OD x 1 1/2″ Wide Lightweight Drum with Center Water Feed – 30/40 Diamonds
PART# 902-221-0312 $264.60 -
3″ Full Bullnose with Center Bearing and Water – 30/40 Diamonds
PART# 902-221-0947 $852.20 -
3/16″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1930 $194.10 -
2″ OD x 2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0916 $231.60 -
3″ OD x 1″ thick 45° Bevel Wheel – 30/40 Diamonds
PART# 902-221-0702 $181.30 -
2″ Full Bullnose with Center Bearing & Water – 50/60 Diamonds
PART# 902-221-1945 $665.50 -
5/8″-11 Female Thread to 1/2 Gas Female Thread
PART# 991-200-0065 $71.40 -
1/4″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1931 $199.20 -
3″ OD x 1 1/2″ Wide Lightweight Drum with Center Water Feed – 50/60 Diamonds
PART# 902-221-1312 $220.50 -
5/8″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0933 $266.20 -
2″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1212 $129.20 -
5/8″-11 Female Thread to Hole for 1/2″ Shaft
PART# 991-200-0062 $86.50 -
5/8″ OD x 1 5/8″ Cutter Bit ONLY for 221-0923 – 50/60 Diamonds
PART# 902-221-1924 $115.90 -
5/16″ Solid Core Drill
PART# 902-227-3003 $74.30 -
1 1/2″ OD x 2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0206 $135.60 -
5/8″-11 Female Thread to 1-1/4″ x 7 (M)
PART# 91-200-0391 $155.70 -
5/8″ OD x 1 5/8″ Cutter Bit ONLY for 221-0923 – 30/40 Diamonds
PART# 902-221-0924 $122.90 -
4 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1942 $372.20 -
4 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0942 $417.50 -
45° Bevel x 1/2″ Wide with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1972 $256.50 -
3 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1941 $294.60 -
3″ OD x 2″ Drum with Bottom Brg – 50/60 Diamonds
PART# 902-221-1922 $359.70 -
4″ Dia. Coarse Segmented Disk
PART# 902-240-0172 $245.90 -
5/8″-11 Female Thread to Ghines Male
PART# 991-200-0064 $59.70 -
3 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0941 $296.30 -
1 1/2″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1206 $110.30 -
2 cm Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0940 $277.80 -
3″ Dia. x 1 1/2″ Wide Drum
PART# 902-299-1003 $278.60 -
3/16″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0930 $200.70 -
5/’8″ OD x 1 5/8″ 2 Piece Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0923 $189.00 -
4 cm Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1936 $330.80 -
3/4″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0938 $290.00 -
5/8″ R x 2 1/2″ OD x .80″ Thick Convex Wheel – 50/60 Diamonds
PART# 902-221-1701 $149.70 -
1 1/2″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1205 $93.10 -
3 cm Full Bullnose with Center Bearing & Water – 50/60 Diamonds
PART# 902-221-1946 $459.80 -
2″ OD x 1 1/2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1914 $190.40 -
5/8″-11 Female Thread to 16mm Male Thread
PART# 91-200-0042 $22.40 -
5″ OD Face Grinding Wheel – 30/40 Diamonds
PART# 902-221-0751 $251.40 -
6″ Dia. Coarse Segmented Disk
PART# 902-240-0171 $316.60 -
1 1/2″ Full Bullnose with Center Washer & Water – 50/60 Diamonds
PART# 902-221-1944 $372.20 -
1 1/2″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0205 $107.10 -
3″ OD x 1″ thick 45° Bevel Wheel – 50/60 Diamonds
PART# 902-221-1702 $165.40 -
2 cm Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1950 $289.50 -
4 3/8″ Dia. Drainboard Tool with Top Bearing
PART# 902-299-0034 $448.60 -
2 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0950 $302.60 -
1″ Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1943 $366.60 -
1″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0939 $345.10 -
3/4″ R Convex with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1961 $256.50 -
3 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0951 $326.10 -
2 1/4″ Full Bullnose with Center Washer & Water – 30/40 Diamonds
PART# 902-298-0716 $708.90 -
2″ OD x 2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0212 $179.20 -
2″ OD x 2″ Drum with Bottom Brg – 50/60 Diamonds
PART# 902-221-1921 $272.90 -
5/’8″ OD x 1 5/8″ 2 Piece Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1923 $197.00 -
5/8″ R Convex with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0960 $228.40 -
5/8″-18 Male Thread to 1/2 Gas Female Thread
PART# 991-200-0066 $66.70 -
5/8″-11 Female Thread to Hole for 3/8″ Shaft
PART# 991-200-0061 $65.60 -
2″ OD x 1 1/2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0914 $197.00 -
1/4″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0931 $210.60 -
1 3/8″ Dia. with a 5/8-11 Female Threaded Connection
PART# 902-237-0177 $104.30 -
5/8″ R Convex with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1960 $223.50 -
3″ OD x 2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1920 $359.70 -
3″ OD x 1 1/2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0918 $291.50 -
5/8″-11 Female Thread to Hole for 3/4″ Shaft
PART# 991-200-0063 $88.10 -
3″ OD x 2″ Drum with Top Brg – 30/40 Diamonds
PART# 902-221-0920 $358.90 -
5/8″-18 Male Thread to 5/8-11 Male Thread
PART# 991-200-0113 $89.40 -
5″ Dia. Coarse Segmented Disk
PART# 902-240-0173 $304.00 -
5/8″-18 Male Thread to to Ghines Thread
PART# 991-200-0068 $72.10 -
3″ OD x 2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1305 $173.30 -
3 cm Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1951 $306.10 -
1/2″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0937 $252.20 -
2″ OD x 2″ Drum with Bottom Brg – 30/40 Diamonds
PART# 902-221-0921 $258.50 -
45° Bevel x 1 1/4″ Wide with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0971 $321.40 -
3″ OD x 2″ Drum with Bottom Brg – 30/40 Diamonds
PART# 902-221-0922 $358.90 -
3 cm Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0935 $363.90 -
1″ Full Bullnose with Center Washer – 30/40 Diamonds
PART# 902-221-0943 $347.10 -
45° Bevel x 1 1/4″ Wide with Bottom Bearing 50/60 Diamonds
PART# 902-221-1971 $289.50 -
3/8″ Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0932 $212.80 -
3″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0304 $212.80 -
2 1/2″ OD x 1 1/2″ Wide Drum – 30/40 Diamonds
PART# 902-221-0214 $149.70 -
2 cm Half Bullnose R with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0934 $275.70 -
3/4″ R x 2 1/2″ OD x .78″ Thick Convex Wheel – 50/60 Diamonds
PART# 902-221-1703 $154.40 -
5/8″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1217 $86.80 -
3″ OD x 1 1/2″ Drum with Top Brg – 50/60 Diamonds
PART# 902-221-1918 $256.50 -
3″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1304 $133.90 -
45° Bevel x 1/2″ Wide with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0972 $275.70 -
5/8″ R x 2 1/2″ OD x .80″ Thick Convex Wheel – 30/40 Diamonds
PART# 902-221-0701 $165.40 -
2 cm Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1934 $251.40 -
3/4″ R x 2 1/2″ OD x .78″ Thick Convex Wheel – 30/40 Diamonds
PART# 902-221-0703 $173.30 -
2 cm Full Bullnose with Center Washer – 50/60 Diamonds
PART# 902-221-1940 $270.30 -
5/8-11 Female to 5/8-11 Male with 1/2″ Hose Connection
PART# 991-200-0154 $215.40 -
2 1/2″ OD x 1 1/2″ Wide Drum – 50/60 Diamonds
PART# 902-221-1214 $122.90 -
3″ Dia. x 1 1/2″ Wide Lightwight Drum with Center Water Feed
PART# 902-299-1005 $307.10 -
4 cm Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0952 $338.70 -
1 1/2″ Full Bullnose with Center Washer & Water – 30/40 Diamonds
PART# 902-221-0944 $417.50 -
5/8″ Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1933 $243.20 -
3 cm Half Bullnose R with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1935 $322.70
Cart
Product Categories
- Shop by Connection Type
- 1 1/4"-7 (F) Connection
- 1-1/2" Vektor/Infinity
- 1"
- 1" Bore
- 1/2 Gas
- 1/2" Shaft
- 1/4" Shaft
- 1/8" Shaft
- 16 mm
- 25 mm Bore
- 3/8" Shaft
- 35 mm Bore
- 5/8" Bore
- 5/8"-11
- 5/8"-18
- 50 mm Bore
- 6 mm Shaft
- 60 mm Bore
- 7/8" Bore
- Anchoring Systems
- Anchors
- Blade Bushing
- Sector & Ghines
- Velcro
- Shop by Machine
- Shop by Tool Type
- 1/2 Gas Bits and Drums
- Adapters & Bushings
- Anchoring Systems
- Diamond Blades
- Drills
- Router Tools
- Shaft Die Grinder Tools
- Vektor/Infinity Tooling
- Water Jackets
- Wheels
- Uncategorized
![](https://tooling.coldspringusa.com/wp-content/uploads/2020/06/CSG_20120613_0693-1099wx520h-1064x503.jpg)
Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.