1″ Diameter Ring Core Drill
PART# 902-235-5171
Continuous ring core drills are equipped for center water feed and can be retipped for new tool performance at a lower cost.
- 4” cutting depth
- 1/2″ Gas Connection
- Diameters are nominal core barrel size; actual holes are slightly larger
$137.10
Additional 1/2 Gas Connection
-
5″ Diameter, 45° Segmented Breaker Wheel
PART# 902-299-0148 $422.30 -
2 cm R x 2 1/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0616 $175.10 -
3 cm x 2″ Full Bullnose – 50/60 Diamonds
PART# 902-221-1621 $218.80 -
1″ Dia. x 2″ Length Finger Bit – 30/40 Diamonds
PART# 902-224-0002 $148.20 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1662 $148.70 -
3/16″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1611 $114.70 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1660 $248.50 -
3 cm x 2″ Full Bullnose with Top Bearing – 50/60 Diamonds
PART# 902-221-1623 $276.40 -
45° Bevel, 1/4″ x 1 3/4″ OD – 50/60 Diamonds
PART# 902-221-1650 $109.80 -
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1659 $190.70 -
1/2″ R x 2″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1657 $159.30 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router with Slot – 30/40 Diamonds
PART# 902-221-0604 $82.80 -
3 cm x 3″ OD Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0633 $295.70 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0662 $166.30 -
1″ Dia. x 3″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0006 $248.90 -
1 5/8″ Diameter Ring Core Drill
PART# 902-235-5176 $151.40 -
30° Bevel, 1/4″ x 3/4″ – 50/60 Diamonds
PART# 902-221-1652 $113.90 -
2 cm x 1 3/4″ OD Full Bullnose – 30/40 Diamonds
PART# 902-221-0620 $224.00 -
2 cm x 1 7/8″ OD Full Bullnose with Top Bearing – 30/40 Diamonds
PART# 902-221-0622 $278.20 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1632 $227.30 -
45° Bevel, 3/4″ x 2 1/4″ OD – 50/60 Diamonds
PART# 902-221-1651 $126.10 -
1/2″ Shaft to 1/2 Gas with 1/4″ Hose Connection
PART# 991-200-0156 $196.50 -
5/8″ x 1 5/8″ Finger Bit – 50/60 Diamonds
PART# 902-224-1005 $105.60 -
Pointed with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0509 $14.40 -
2″ Diameter x 3″ Tool Length
PART# 902-245-0307 $273.00 -
Cone 1/2″ Dia. x 3/4″ Length with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0511 $39.50 -
1/2″ Gas Male to CNC Adapter (3/8″ Collet – Others Available)
PART# 991-200-0370 $328.60 -
5/8″ R x 2″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1658 $176.90 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 30/40 Diamonds
PART# 902-221-0602 $64.90 -
1/2″ Gas Male Thread to Hole for 3/8″ Shaft
PART# 991-200-0057 $72.10 -
1 1/8″ Diameter Ring Core Drill
PART# 902-235-5173 $140.00 -
16 mm Female Thread to 5/8-11 Male Thread
PART# 91-200-0043 $79.30 -
1/2″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1614 $131.30 -
3/4″ R Convex x 2 1/2″ OD with 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1643 $173.30 -
1/4″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0655 $143.50 -
1/4″ Sphere End x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0506 $22.90 -
3 cm R x 3″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0617 $269.40 -
1″ Dia. x 2″ Length Finger Bit – 50/60 Diamonds
PART# 902-224-1002 $138.60 -
1/4″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0612 $129.50 -
3/8″ Dia. Blunt x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0504 $19.30 -
5/8″ x 1 5/8″ Finger Bit – 30/40 Diamonds
PART# 902-224-0005 $122.90 -
5/8″ R x 2″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0615 $157.60 -
7/8″ Diameter Ring Core Drill
PART# 902-235-5178 $134.30 -
1/2″ Dia. Ball with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0513 $25.00 -
3 cm x 2″ Full Bullnose – 30/40 Diamonds
PART# 902-221-0621 $265.90 -
3/4″ R Convex x 2 1/2″ OD – 50/60 Diamonds
PART# 902-221-1641 $140.10 -
1 1/4″ Diameter Ring Core Drill
PART# 902-235-5174 $142.90 -
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0659 $218.80 -
1/2″ Shaft to a 5/8-11 Male Thread
PART# 991-200-0040 $60.00 -
1/2″ R x 2″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0614 $140.10 -
5/8″ R Convex x 2″ OD with 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1642 $154.00 -
5/8″ R Convex x 2″ OD with 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0642 $183.70 -
3/8″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1613 $124.80 -
3 cm x 3″ OD Ogee – 30/40 Diamonds
PART# 902-221-0631 $251.90 -
45° Bevel, 1/4″ x 1 3/4″ OD – 30/40 Diamonds
PART# 902-221-0650 $122.50 -
5/8″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1615 $143.50 -
3/8″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0613 $134.80 -
1/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1653 $124.30 -
5/8″ R Convex x 2″ OD – 30/40 Diamonds
PART# 902-221-0640 $147.00 -
3″ Dia. x 2″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1004 $387.90 -
45° Bevel, 1/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0661 $126.10 -
1/4″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1612 $118.10 -
1″ Dia. x 4″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1008 $233.10 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router with Slots – 50/60 Diamonds
PART# 902-221-1603 $68.30 -
2 cm R x 2 1/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1616 $147.00 -
5/8″ R Convex x 2″ OD – 50/60 Diamonds
PART# 902-221-1640 $126.10 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0632 $255.50 -
3 cm R x 3″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1617 $206.50 -
3/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0656 $157.60 -
2 cm x 2 1/2″ OD Ogee – 30/40 Diamonds
PART# 902-221-0630 $187.40 -
1/2″ Gas Male Thread to Hole for 1/2″ Shaft
PART# 991-200-0058 $72.10 -
1″ Dia. x 4″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0008 $277.60 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 30/40 Diamonds
PART# 902-221-0601 $63.00 -
1/2″ Gas Male Thread to Ghines Male
PART# 991-200-0046 $44.10 -
Dove Tail 5/8″ Dia. with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0510 $34.40 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 50/60 Diamonds
PART# 902-221-1601 $54.90 -
1/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0653 $131.30 -
45° Bottom Bevel with Top Bearing – 30/40 Diamonds
PART# 902-221-0664 $126.10 -
3/16″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0611 $126.10 -
1″ Dia. x 7″ Length Router – 30/40 Diamonds
PART# 902-224-0007 $390.00 -
1/2″ Bullet x 3/4″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0524 $41.90 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0660 $297.50 -
45° Bottom Bevel with Top Bearing – 50/60 Diamonds
PART# 902-221-1664 $115.60 -
1/2″ Gas Male Thread to 5/8-11 Male Thread
PART# 991-200-0045 $61.30 -
3 cm x 3″ OD Ogee – 50/60 Diamonds
PART# 902-221-1631 $209.90 -
2″ Dia. x 2″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0003 $236.40 -
45° Bevel, 1/4″ x 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1661 $115.60 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router with Slots – 30/40 Diamonds
PART# 902-221-0603 $81.10 -
2 3/4″ Diameter Segmented Core Drill
PART# 902-230-2111 $192.90 -
2 cm x 1 7/8″ OD Full Bullnose with Top Bearing – 50/60 Diamonds
PART# 902-221-1622 $258.90 -
3″ Dia. x 1 1/2″ Wide Lightwight Drum with Center Water Feed
PART# 902-299-1005 $307.10 -
45° Bevel, 3/4″ x 2 1/4″ OD – 30/40 Diamonds
PART# 902-221-0651 $161.00 -
5/8″ R x 2″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0658 $190.70 -
1 1/2″ Dia. with 1/2 Gas Connection
PART# 902-235-5172 $148.60 -
1/2″ Gas Male Thread to Hole for 1/4″ Shaft
PART# 991-200-0056 $72.10 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 50/60 Diamonds
PART# 902-221-1602 $56.70 -
2 cm x 2 1/2″ OD Ogee – 50/60 Diamonds
PART# 902-221-1630 $174.70 -
1″ Dia. x 3/4″ Disc with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0520 $45.90 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router with Slot – 50/60 Diamonds
PART# 902-221-1604 $70.00
Cart
Product Categories
- Shop by Connection Type
- 1 1/4"-7 (F) Connection
- 1-1/2" Vektor/Infinity
- 1"
- 1" Bore
- 1/2 Gas
- 1/2" Shaft
- 1/4" Shaft
- 1/8" Shaft
- 16 mm
- 25 mm Bore
- 3/8" Shaft
- 35 mm Bore
- 5/8" Bore
- 5/8"-11
- 5/8"-18
- 50 mm Bore
- 6 mm Shaft
- 60 mm Bore
- 7/8" Bore
- Anchoring Systems
- Anchors
- Blade Bushing
- Sector & Ghines
- Velcro
- Shop by Machine
- Shop by Tool Type
- 1/2 Gas Bits and Drums
- Adapters & Bushings
- Anchoring Systems
- Diamond Blades
- Drills
- Router Tools
- Shaft Die Grinder Tools
- Vektor/Infinity Tooling
- Water Jackets
- Wheels
- Uncategorized
![](https://tooling.coldspringusa.com/wp-content/uploads/2020/06/CSG_20120613_0693-1099wx520h-1064x503.jpg)
Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.