4″ Diameter Segmented Core Drill
PART# 902-230-2121
Special lengths, diameters and connection systems are available upon request. Prices and delivery may vary.
Drills are equipped for central water feed and may be used for marble, granite, travertine, limestone, slate, and concrete.
All drill cores in good condition may be retipped for new tool performance at a reduced price.
$400.00
Additional 1/2 Gas Connection
-
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1659 $190.70 -
5/8″ R Convex x 2″ OD – 30/40 Diamonds
PART# 902-221-0640 $147.00 -
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0659 $218.80 -
1/2″ R x 2″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0657 $173.30 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1660 $248.50 -
1/2″ Gas Male Thread to Hole for 1/2″ Shaft
PART# 991-200-0058 $72.10 -
3 cm x 3″ OD Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1633 $246.70 -
5/8″ x 1 5/8″ Finger Bit – 30/40 Diamonds
PART# 902-224-0005 $122.90 -
3/4″ R Convex x 2 1/2″ OD – 30/40 Diamonds
PART# 902-221-0641 $162.90 -
3 cm x 2″ Full Bullnose – 50/60 Diamonds
PART# 902-221-1621 $218.80 -
3 cm R x 3″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1617 $206.50 -
1/2″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1614 $131.30 -
3″ Dia. x 2″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0004 $471.40 -
2 cm x 2 1/2″ OD Ogee – 50/60 Diamonds
PART# 902-221-1630 $174.70 -
1″ Dia. x 7″ Length Router – 30/40 Diamonds
PART# 902-224-0007 $390.00 -
2 cm x 1 3/4″ OD Full Bullnose – 50/60 Diamonds
PART# 902-221-1620 $189.00 -
3″ Dia. x 2″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1004 $387.90 -
2 3/8″ Diameter Segmented Core Drill
PART# 902-230-2123 $164.30 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 50/60 Diamonds
PART# 902-221-1602 $56.70 -
5/8″ R Convex x 2″ OD with 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0642 $183.70 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1632 $227.30 -
3/16″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1654 $133.10 -
5/8″ R x 2″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0658 $190.70 -
3/4″ R Convex x 2 1/2″ OD with 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0643 $199.50 -
45° Bevel, 1/4″ x 1 3/4″ OD – 50/60 Diamonds
PART# 902-221-1650 $109.80 -
1″ Dia. x 3/4″ Disc with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0520 $45.90 -
1″ Dia. x 3″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0006 $248.90 -
1/2″ Gas Male Thread to Hole for 3/8″ Shaft
PART# 991-200-0057 $72.10 -
1/4″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1612 $118.10 -
45° Bottom Bevel with Top Bearing – 30/40 Diamonds
PART# 902-221-0664 $126.10 -
5/8″ x 1 5/8″ Finger Bit – 50/60 Diamonds
PART# 902-224-1005 $105.60 -
2″ Dia. x 2″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1003 $212.80 -
1″ Dia. x 4″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0008 $277.60 -
1/2″ Gas Male to CNC Adapter (3/8″ Collet – Others Available)
PART# 991-200-0370 $328.60 -
3 1/2″ Diameter Segmented Core Drill
PART# 902-230-2132 $221.40 -
45° Bevel, 3/4″ x 2 1/4″ OD – 50/60 Diamonds
PART# 902-221-1651 $126.10 -
2 cm x 1 3/4″ OD Full Bullnose – 30/40 Diamonds
PART# 902-221-0620 $224.00 -
1/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0653 $131.30 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0660 $297.50 -
Dove Tail 5/8″ Dia. with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0510 $34.40 -
3/8″ Dia. Blunt x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0504 $19.30 -
3/4″ R Convex x 2 1/2″ OD with 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1643 $173.30 -
2 cm R x 2 1/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1616 $147.00 -
1″ Dia. x 4″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1008 $233.10 -
2 3/4″ Diameter Segmented Core Drill
PART# 902-230-2111 $192.90 -
3/8″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0613 $134.80 -
3/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1656 $147.00 -
16 mm Female Thread to 5/8-11 Male Thread
PART# 91-200-0043 $79.30 -
45° Bevel, 3/4″ x 2 1/4″ OD – 30/40 Diamonds
PART# 902-221-0651 $161.00 -
5/8″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1615 $143.50 -
3/4″ R Convex x 2 1/2″ OD – 50/60 Diamonds
PART# 902-221-1641 $140.10 -
Pointed with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0509 $14.40 -
3 cm x 3″ OD Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0633 $295.70 -
30° Bevel, 1/4″ x 3/4″ – 30/40 Diamonds
PART# 902-221-0652 $134.80 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0662 $166.30 -
3 cm R x 3″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0617 $269.40 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 30/40 Diamonds
PART# 902-221-0601 $63.00 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 50/60 Diamonds
PART# 902-221-1601 $54.90 -
3 cm x 2″ Full Bullnose with Top Bearing – 50/60 Diamonds
PART# 902-221-1623 $276.40 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1662 $148.70 -
3/4″ Dia. x 1 1/2″ Length Finger Bit – 50/60 Diamonds
PART# 902-224-1001 $122.90 -
1/2″ Bullet x 3/4″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0524 $41.90 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 30/40 Diamonds
PART# 902-221-0602 $64.90 -
1/2″ Dia. Ball with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0513 $25.00 -
3″ Diameter Segmented Core Drill
PART# 902-230-2120 $207.10 -
1/2″ Gas Male Thread to 5/8-11 Male Thread
PART# 991-200-0045 $61.30 -
3 cm x 2″ Full Bullnose – 30/40 Diamonds
PART# 902-221-0621 $265.90 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router with Slot – 50/60 Diamonds
PART# 902-221-1604 $70.00 -
3 cm x 2″ Full Bullnose with Top Bearing – 30/40 Diamonds
PART# 902-221-0623 $295.70 -
1/4″ Sphere End x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0506 $22.90 -
5/8″ R Convex x 2″ OD with 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1642 $154.00 -
3/16″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1611 $114.70 -
2 cm x 2 1/2″ OD Ogee – 30/40 Diamonds
PART# 902-221-0630 $187.40 -
2 1/4″ Diameter Segmented Core Drill
PART# 902-230-2124 $150.00 -
2 cm x 1 7/8″ OD Full Bullnose with Top Bearing – 30/40 Diamonds
PART# 902-221-0622 $278.20 -
2 cm R x 2 1/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0616 $175.10 -
3/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0656 $157.60 -
2″ Diameter x 3″ Tool Length
PART# 902-245-0307 $273.00 -
1/2″ R x 2″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0614 $140.10 -
5″ Diameter, 45° Segmented Breaker Wheel
PART# 902-299-0148 $422.30 -
Cone 1/2″ Dia. x 3/4″ Length with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0511 $39.50 -
1/2″ Shaft to Ghines Male
PART# 991-200-0047 $48.10 -
45° Bottom Bevel with Top Bearing – 50/60 Diamonds
PART# 902-221-1664 $115.60 -
1/2″ Shaft to a 5/8-11 Male Thread
PART# 991-200-0040 $60.00 -
45° Bevel, 1/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0661 $126.10 -
2″ Dia. x 2″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0003 $236.40 -
1 1/2″ Dia. with 1/2 Gas Connection
PART# 902-235-5172 $148.60 -
3″ Dia. x 1 1/2″ Wide Lightwight Drum with Center Water Feed
PART# 902-299-1005 $307.10 -
5/8″ R Convex x 2″ OD – 50/60 Diamonds
PART# 902-221-1640 $126.10 -
45° Bevel, 1/4″ x 1 3/4″ OD – 30/40 Diamonds
PART# 902-221-0650 $122.50 -
3/4″ Dia. x 1 1/2″ Length Finger Bit – 30/40 Diamonds
PART# 902-224-0001 $126.00 -
1/2″ Shaft to 1/2 Gas with 1/4″ Hose Connection
PART# 991-200-0156 $196.50 -
3/16″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0654 $138.40 -
30° Bevel, 1/4″ x 3/4″ – 50/60 Diamonds
PART# 902-221-1652 $113.90 -
3/8″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1613 $124.80 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0632 $255.50 -
1/4″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1655 $127.60 -
1/2″ Gas Male Thread to Ghines Male
PART# 991-200-0046 $44.10 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router with Slots – 50/60 Diamonds
PART# 902-221-1603 $68.30
Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.