5″ Stock Removal Wheel
Buy this 5 inch diameter stock removal wheel with a 35mm center bore for CNC machinery. Machined with center water holes and balanced for accuracy. Our diamond tools work well in natural stones and engineered stone in wet cutting applications.
Retip these wheels or your wheels with new diamonds at a reduced price and new tool performance. Contact us at tooling@coldspringusa.com or 320-685-4840 for more information.
$707.10
Additional CNC Stock Removal Wheels
-
5/8″ R Convex x 2″ OD with 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0642 $183.70 -
1/4″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0655 $143.50 -
3/4″ R Convex x 2 1/2″ OD – 30/40 Diamonds
PART# 902-221-0641 $162.90 -
Dove Tail 5/8″ Dia. with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0510 $34.40 -
1/4″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1655 $127.60 -
3 cm x 2″ Full Bullnose with Top Bearing – 50/60 Diamonds
PART# 902-221-1623 $276.40 -
3″ Stock Removal Wheel
PART# 902-245-0251R $514.30 -
1″ Dia. x 2″ Length Finger Bit – 30/40 Diamonds
PART# 902-224-0002 $148.20 -
1/2″ Bullet x 3/4″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0524 $41.90 -
3/16″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1611 $114.70 -
1/2″ Dia. Ball with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0513 $25.00 -
1/2″ Gas Male Thread to Ghines Male
PART# 991-200-0046 $44.10 -
1/2″ Gas Male Thread to 5/8-11 Male Thread
PART# 991-200-0045 $61.30 -
45° Bevel, 3/4″ x 2 1/4″ OD – 30/40 Diamonds
PART# 902-221-0651 $161.00 -
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0659 $218.80 -
1/4″ Sphere End x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0506 $22.90 -
1″ Dia. x 3″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0006 $248.90 -
5/8″ R x 2″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1658 $176.90 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1632 $227.30 -
3/16″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0611 $126.10 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router with Slot – 50/60 Diamonds
PART# 902-221-1604 $70.00 -
3/4″ R Convex x 2 1/2″ OD – 50/60 Diamonds
PART# 902-221-1641 $140.10 -
3 cm R x 3″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1617 $206.50 -
2.5″ Dia. x 3″ Tool Length
PART# 902-245-0308R $321.40 -
45° Bevel, 1/4″ x 1 3/4″ OD – 50/60 Diamonds
PART# 902-221-1650 $109.80 -
1/2″ Gas Male Thread to Hole for 1/2″ Shaft
PART# 991-200-0058 $72.10 -
Pointed with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0509 $14.40 -
3″ Dia. x 2″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0004 $471.40 -
5/8″ x 1 5/8″ Finger Bit – 30/40 Diamonds
PART# 902-224-0005 $122.90 -
2 cm x 2 1/2″ OD Ogee – 50/60 Diamonds
PART# 902-221-1630 $174.70 -
3 cm R x 3″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0617 $269.40 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 50/60 Diamonds
PART# 902-221-1602 $56.70 -
3 cm x 2″ Full Bullnose – 30/40 Diamonds
PART# 902-221-0621 $265.90 -
45° Bevel, 1/4″ x 1 3/4″ OD – 30/40 Diamonds
PART# 902-221-0650 $122.50 -
5/8″ R Convex x 2″ OD – 30/40 Diamonds
PART# 902-221-0640 $147.00 -
5/8″ x 1 5/8″ Finger Bit – 50/60 Diamonds
PART# 902-224-1005 $105.60 -
3/4″ R Convex x 2 1/2″ OD with 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0643 $199.50 -
2 3/4″ Diameter Segmented Core Drill
PART# 902-230-2111 $192.90 -
2 cm x 2 1/2″ OD Ogee with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0632 $255.50 -
1/4″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0612 $129.50 -
3/4″ R Convex x 2 1/2″ OD with 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1643 $173.30 -
30° Bevel, 1/4″ x 3/4″ – 30/40 Diamonds
PART# 902-221-0652 $134.80 -
1/2″ Gas Male Thread to Hole for 3/8″ Shaft
PART# 991-200-0057 $72.10 -
5″ Diameter, 45° Electroplated Wheel, 35 mm Connection
PART# 902-298-1751 $435.70 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router with Slots – 50/60 Diamonds
PART# 902-221-1603 $68.30 -
1″ Dia. x 4″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1008 $233.10 -
3″ Dia. x 2″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1004 $387.90 -
3/8″ R x 1 3/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0613 $134.80 -
30° Bevel, 1/4″ x 3/4″ – 50/60 Diamonds
PART# 902-221-1652 $113.90 -
3 cm x 2″ Full Bullnose – 50/60 Diamonds
PART# 902-221-1621 $218.80 -
16 mm Female Thread to 5/8-11 Male Thread
PART# 91-200-0043 $79.30 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 30/40 Diamonds
PART# 902-221-0601 $63.00 -
3/8″ Dia. Blunt x 3/8″ Length with a 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0504 $19.30 -
2 cm R x 2 1/4″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0616 $175.10 -
1/4″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1612 $118.10 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0660 $297.50 -
3/8″ R x 1 3/4″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1613 $124.80 -
1″ Dia. x 4″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0008 $277.60 -
2 cm x 1 3/4″ OD Full Bullnose – 30/40 Diamonds
PART# 902-221-0620 $224.00 -
3/16″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1654 $133.10 -
45° Bevel, 1/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0661 $126.10 -
45° Bevel, 1/4″ x 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1661 $115.60 -
3 cm x 3″ OD Ogee – 50/60 Diamonds
PART# 902-221-1631 $209.90 -
3 cm x 2″ Full Bullnose with Top Bearing – 30/40 Diamonds
PART# 902-221-0623 $295.70 -
Cone 1/2″ Dia. x 3/4″ Length with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0511 $39.50 -
2 cm R x 2 1/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1659 $190.70 -
45° Bottom Bevel with Top Bearing – 50/60 Diamonds
PART# 902-221-1664 $115.60 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router with Slots – 30/40 Diamonds
PART# 902-221-0603 $81.10 -
1/2″ Gas Male Thread to Hole for 1/4″ Shaft
PART# 991-200-0056 $72.10 -
1/2″ Shaft to Ghines Male
PART# 991-200-0047 $48.10 -
5/8″ R Convex x 2″ OD – 50/60 Diamonds
PART# 902-221-1640 $126.10 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 50/60 Diamonds
PART# 902-221-1662 $148.70 -
2 cm x 1 7/8″ OD Full Bullnose with Top Bearing – 50/60 Diamonds
PART# 902-221-1622 $258.90 -
Form “V” Segmented Breaker Wheel
PART# 902-299-0154 $785.80 -
1/2″ Shaft to 5/8-11 with Graden Hose Connection
PART# 991-200-0152 $188.60 -
3 cm x 3″ OD Ogee – 30/40 Diamonds
PART# 902-221-0631 $251.90 -
1″ Dia. x 3/4″ Disc with 1/4″ Shaft – 50/60 Diamonds
PART# 902-221-0520 $45.90 -
2″ Dia. x 2″ Length Drum Router – 50/60 Diamonds
PART# 902-224-1003 $212.80 -
1″ Dia. x 2″ Length Finger Bit – 50/60 Diamonds
PART# 902-224-1002 $138.60 -
1/2″ Dia. x 1 1/2″ Length Blunt End Router – 50/60 Diamonds
PART# 902-221-1601 $54.90 -
2 cm x 2 1/2″ OD Ogee – 30/40 Diamonds
PART# 902-221-0630 $187.40 -
1/2″ R x 2″ OD Half Bullnose with Bottom Bearing – 30/40 Diamonds
PART# 902-221-0657 $173.30 -
5/8″ R x 2″ OD Half Bullnose – 30/40 Diamonds
PART# 902-221-0615 $157.60 -
4″ Stock Removal Wheel
PART# 902-245-0252R $557.10 -
2 cm x 1 7/8″ OD Full Bullnose with Top Bearing – 30/40 Diamonds
PART# 902-221-0622 $278.20 -
1 1/2″ Dia. with 1/2 Gas Connection
PART# 902-235-5172 $148.60 -
3 cm R x 3″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1660 $248.50 -
45° Bevel, 3/4″ x 1 1/4″ Bottom Bearing – 30/40 Diamonds
PART# 902-221-0662 $166.30 -
45° Bevel, 3/4″ x 2 1/4″ OD – 50/60 Diamonds
PART# 902-221-1651 $126.10 -
1/2″ R x 2″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1657 $159.30 -
1.25″ Dia. x 3″ Tool Length
PART# 902-245-0306R $192.90 -
1/2″ Dia. x 1 1/2″ Length Sphere End Router – 30/40 Diamonds
PART# 902-221-0602 $64.90 -
1/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1653 $124.30 -
1/2″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1614 $131.30 -
2″ Dia. x 2″ Length Drum Router – 30/40 Diamonds
PART# 902-224-0003 $236.40 -
5/8″ R x 2″ OD Half Bullnose – 50/60 Diamonds
PART# 902-221-1615 $143.50 -
3/8″ R x 1 3/4″ OD Half Bullnose with Bottom Bearing – 50/60 Diamonds
PART# 902-221-1656 $147.00 -
45° Bottom Bevel with Top Bearing – 30/40 Diamonds
PART# 902-221-0664 $126.10 -
1/2″ Gas Male to CNC Adapter (3/8″ Collet – Others Available)
PART# 991-200-0370 $301.40
- Shop by Connection Type
- 1 1/4"-7 (F) Connection
- 1-1/2" Vektor/Infinity
- 1"
- 1" Bore
- 1/2 Gas
- 1/2" Shaft
- 1/4" Shaft
- 1/8" Shaft
- 16 mm
- 25 mm Bore
- 3/8" Shaft
- 35 mm Bore
- 5/8" Bore
- 5/8"-11
- 5/8"-18
- 50 mm Bore
- 6 mm Shaft
- 60 mm Bore
- 7/8" Bore
- Anchoring Systems
- Anchors
- Blade Bushing
- Sector & Ghines
- Velcro
- Shop by Machine
- Shop by Tool Type
- 1/2 Gas Bits and Drums
- Adapters & Bushings
- Anchoring Systems
- Diamond Blades
- Drills
- Router Tools
- Shaft Die Grinder Tools
- Vektor/Infinity Tooling
- Water Jackets
- Wheels
- Uncategorized

Custom Tooling
Tell us the material you’re cutting and the shape and profile or texture you need, and we can design a tool to work with the machines you have. Our in-house drafting department can create a precise tool for your specialized needs. Give us your hand-drawn sketch or tell us in a phone conversation. We can work with whatever you provide.